Product Description
German:
Der transparente Schrumpfschlauch von MDPC-X hat nicht nur den offensichtlichen Vorteil, dass nun auch Anfänger die Shrinkless Methode leichter üben und perfektionieren können, sondern bietet noch deutlich mehr. Vorgeschnitten auf 15mm eignet sich dieser perfekt um den MDPC-X Sleeve zu Shrinken/ schmelzen.
Small:
- 4:1 Schrumpf Verhältnis.
- 7.4mm Außendurchmesser für einfaches "überstülpen" über den Sleeve
- Schrumpft auf 1,7mm für maximalen Halt und Kompression an unseren 1mm² und 1,5mm² PCHMG Litzen
- Perfekt geschmolzener Sleeve durch transparentes Material
- Weiches, 0,2mm dünnes Material mit dem Verzicht auf jeglichen Kleber
- Shrink Temperatur (min) 90 Grad
- Perfekt für normale Litzen mit MDPC-X Sleeve geeignet und damit der Herstellung für gesleevte EPS, PCI-E, ATX, Sata und 4Pin Power Kabeln
- Hergestellt in Deutschland und weltweit qualitativ einzigartig!
Medium:
- 3.4:1 Schrumpf Verhältnis.
- 13mm Außendurchmesser für einfaches "überstülpen" über den Sleeve
- Schrumpft auf 3,8mm für maximalen Halt und Kompression
- Perfekt geschmolzener Sleeve durch transparentes Material
- Weiches, dünnes Material mit dem Verzicht auf jeglichen Kleber
- Shrink Temperatur (min) 90 Grad
- Hergestellt in Deutschland und weltweit qualitativ einzigartig!
Big:
- 3:1 Schrumpf Verhältnis.
- 25mm Außendurchmesser für einfaches "überstülpen"
- Schrumpft auf 8mm für maximalen Halt und Kompression
- Perfekt geschmolzener Sleeve durch transparentes Material
- Weiches, dünnes Material mit dem Verzicht auf jeglichen Kleber
- Shrink Temperatur (min) 90 Grad
- Hergestellt in Deutschland und weltweit qualitativ einzigartig!
English:
This is - very likely - the best heat-shrink in existence for the purpose of cable sleeving.
The sum of its properties makes the whole sleeving process as easy as never before:
4,35:1 shrink ratio. Over-expanded you can reach a 6:1 shrink ratio.
Small:
Initial 7.4mm ID (over-expanded > 10mm) for total clearance when moving it over the cable sleeving in every situation.
Perfect shaping of melted sleeving on the crimp terminal.
- See the cable sleeve through the heat-shrink for a 100% precise positioning of the sleeving.
- See the melting process of the cable sleeving through the heat-shrink while doing the “shrinkless method”.
- Extremely soft material for the most extreme grip on wires and cable sleeve without the use of glue.
- Ultra-thin material (0.2 mm at initial diameter) combined with extreme transparency, almost invisible on top of cable sleeving.
- Dielectric strength of 22 kV/mm. Shrink temperature (Min) of only 90°C. Constant operating range at temperatures from -60°C to +140°C. Extremely good short term resistance to fire, especially important for the “shrinkless” melting technique.
- Made in Germany only for MDPC-X. Globally unique product in a class of its own.
Medium:
- 4:1 shrink ratio.
- Initial 13.8 mm ID for total clearance when moving the heat-shrink over many connectors and the cable sleeving in every situation.
- Shrinking down to 3.5 mm for maximum grip and compression on the cable and sleeving.
- See the cable sleeve through the heat-shrink for a 100% precise positioning of the sleeving.
- See the melting process of the cable sleeving through the heat-shrink while doing the “shrinkless method”. With some practice, you can often melt together the connector plastic material with the cable sleeving.
- Extremely soft material for the most extreme grip on wires and cable sleeve without the use of glue.
- Ultra-thin material (0.25 mm at initial diameter) combined with extreme transparency, almost invisible on top of cable sleeving.
- Dielectric strength of 22 kV/mm. Shrink temperature (Min) of only 90°C. Constant operating range at temperatures from -60°C to +140°C. Extremely good short term resistance to fire, especially important for the “shrinkless” melting technique.
- Made in Germany only for MDPC-X. Globally unique product in a class of its own.
The inner diameter of our MEDIUM (formerly called "SATA") heatshrink is 13.0 mm before shrinking (it can be overexpanded to more by using a long nosed plier or similar to stretch the heatshrink tubing from the inside).After maximum shrinking, the inner diameter of MEDIUM heatshrink can shrink down to 3.8 mm. The maximum shrink ratio of this heatshrink is 3.4:1.
Big:
- Halogen-free.
- 3:1 shrink ratio.
- No glue, no dual wall.
- Initial 25 mm ID for total clearance when moving the heat-shrink over many connectors and the cable sleeving in every situation.
- Shrinking down to 8 mm for maximum grip and compression on the cable and sleeving.
- Extreme transparency and very high grip.
- Dielectric strength of 22 kV/mm. Shrink temperature (Min) of only 90°C. Constant operating range at temperatures from -60°C to +140°C. Extremely good short term resistance to fire.
Inhalt Pre-Cut Heat-Shrink Small: 100pcs/ 15mm
