Der neue MDPC-X Micro Sleeve ist vor allem für Kabel von einer dicke zwischen 17-AWG bis 20-AWG ausgelegt.
Unsere 1mm² Litze passt hier perfekt --> https://pchardware-modding.de/Litze-Wire
Der Micro Sleeve kann ebenfalls verwendet werden um zwei dünne Litzen mit maximalen Außendurchmesser von 1.3mm² (23AWG), z.B. unsere 0,25mm² Litze, zu sleeven.
Dieser Sleeve ist perfekt für alle geeignet, die eigene Kabel mit dem neuen PCI-E 5 12VHPWR (12/16Pin) anfertigen wollen.
Alternativ kann dieser Sleeve auch für "Doppelsleeving" genutzt werden. Interessant für Custom Coiled Cables (Keyboards etc.).
Sleeving Guide für alle Kabel hier (DE)---> https://pchardware-modding.de/PCHM-Sleeving-Guide-fuer-Anfaenger-und-Fortgeschrittene-Extensions-Verlaengerungen-MDPC-X-Handmade-DiY-Do-It-Yourself-ATX-PCI-E-EPS-Kabel
MICRO sleeving is typically used for single wires in the diameter range between 1.5 mm and 2.0 mm, when SMALL and XTC sleeving are already too big, even if stretched lengthwise. It is also highly useful to bundle two very thin wires (like our 23-AWG) in one MICRO sleeving.
You will find great advice and inspiration about working with MICRO sleeving, very small connectors and crimp terminals, by looking at our sleeving guide: Making custom cables for PCIe-5 12VHPWR.
This size can also be very useful when used in its high expansion state, if your object has an outer-diameter between 3.5 mm and 4.0 mm. Remember that the original length is reduced to 50% if a sleeving is used at its maximum expansion state.
Last but not least: MICRO sleeving can create highly interesting looks when used as the upper sleeving layer on a 2-layer-sleeving-style custom cable, because of its unique weave structure. Be creative!
| Hersteller: | MDPCX |
| Artikelnummer: | 1100-Area 51-011 |
0
